3.5 Inch Gauge Virginia 4-4-0
American Design LBSC loco with tender, Colourful loco in new condition, Un-used! REDUCED
PRICE: £Reserved
- Factory finished in blue with white lining, little used and mechanically very good! includes: Brass dome, Mech Lub, Injector & cross head pump. bit dirty in the pictures but with a bit of spit a polish will shine like a new penny! REDUCED PRICE!
7 1/4 Open Wagon
Factory Finished in grey,with brake, good large substantial wagon with space for 4,5,6 people!
PRICE: £RESERVED
2 Meter standard 16mm Alu rail lengths
not to the standard size, these are only 2m long, £4.75 per length!
PRICE: £4.75 per length REDUCED
1 Inch Scale Super Sentinel Wagon
Factory finished earlier this year but it proved to be to heavy of the new owner so its up for sale, standard items, gas fired, full radio control and he added a couple of detail parts like lights and mirrors. only a month old so really as new unused! Unique colour scheme, this is the only one we have done!
PRICE: £SOLD
3.5
Dont see these everyday, fully working and highly detailed 3.5Inch Duchess chassis, proper working 4 cylinder version and it is all completed as a rolling chassis, the engineering and finish is to the highest standard, rods and parts in stainless steel. It has been stored for some time but a good oil and some gentle persuasion got the wheels moving. included is complete chassis, smoke box, tender frames, wheels axle boxes, 2 buffers, drawings and some castings. Real gold medal stuff! BOILER SOLD SEPARATELY SO RE-PRICED TO EXCLUDE IT!
PRICE: £SOLD
Myford super 7 accessories
To fit Myford super 7, genuine Myford Collet attachment and set of collets in great condition In 1/16 increments from 1/16 to 7/8" 17 in total £525, Vertical Slide SOLD, oil can £SOLD, Myford vertical slide vice £45. all in good condition.
PRICE: £Individually
3 1/2 Inch Titch parts
Part project, chassis and cylinders look to be complete, lots of parts to get you started including a complete boilers (condition unknown), about the smallest passenger hauling loco you can buy, this seems to be the large boiler type. Priced to sell!
PRICE: £Sold
5 Inch Black 5 parts
Not a huge amount to go on but a start none the less on an iconic locomotive the LMS Black 5! included are: tender wheels, frames, nicely finished axle boxes, loco front bogie, GA drawing, axles and other misc steel parts, as i said not a lot to go on but priced to reflect that!
PRICE: £295
5Inch A3
Clarkson design,Proper 3 cylinder version with conjugated valve gear, mechanically very good and nicely detailed model, a re-paint on the boiler lagging sheet would improve its looks, run regularly. includes mech lub, 2 x injector, southern fed certification (out of date). Nice working mainline loco with large haulage capacity.
PRICE: £SOLD
O Gauge Live Steam
32mm,Coal Fired so a real rarity, Free lance design but a attractive little loco, see the gallery for more pictures.
PRICE: £Sold
2 Inch Scale Clayton Wagon
2" Clayton wagon, scratch built by a competent engineer. These models have a limited boiler capacity making them an economical road model, but being small they are quite easy to move/lift about single handed. Fine detail & drive train make it an attractive model, build your own body to suit! Includes injector, hand pump and crankshaft pump.
PRICE: £SOLD
3
Kit Built in 3" scale, looks to be hardly used and in storage for some time, really nicely built and ticks over like a charm, rare in the showmans version, a bit of spit and polish and she will shine like the full size!
PRICE: £RESERVED
3.5
included in this set are frames, boiler kit, smoke box, wheels , buffers, rods and cylinder castings. Good start on a popular model!
PRICE: £SOLD
16mm Scale Electric locomotive
16mm, Gauge O 32mm, Only the Fowler electric locomotive left now, 0-4-0 9volt nicely detailed £195.00
PRICE: £individually
5 Inch Class 42 Warship Class
Kit built to a high standard, older twin motor version but with 4QD electronic control. all body detail parts are with the model although some will need re attaching, could do with re-glazing but the body is in really good shape, two corners on one end damaged (see gallery pics) apart from that the owner did a good job! iconic shape, good club loco with a little TLC!
PRICE: £Reserved
3 1/2 Inch Britannia Boiler & Castings
Project started in the 70s but never really got going so offer to you is the full drawing set, full casting set with some machining done to a good standard, loco & tender frames and most importantly a finished professionally manufactured boiler, copper silver soldered by Chambers in the 70s we tested the boiler so it will be sold with a new 1 1/2 times test. Steel work in anti rust protection that easily washes off. Looking for a project? this could be it!
PRICE: £SOLD
3.5 Inch Firefly parts
Project loco parts, the firefly is still one of the most popular 3.5inch locos and we have castings, roughed out rods, boiler parts and lots of little boxes of widgets, things a can easily identify are steam brake valve, hinges & cylinder draincocks! priced to sell!
PRICE: £Sold
7.25 Inch Open Wagon
Good robust model with equalized bogies, will fit 4-6 people.
PRICE: £RESERVED
7.25 Inch Gauge Pearl
PRICE: £RESERVED
Swallow 5
Maxitrak Swallow re-refurbishment, one of the most popular 5 Inch 0-4-0 models we have made, this one has a rolling chassis and certified boiler, all the parts to build the body to complete it. Chassis needs timing but doesnt appear to have much wear. Good project loco!
PRICE: £2750
Meter Maid 0-6-0 5 Inch gauge
This has come back to us and is a loco we know well, originally built by a competent engineer and well looked after and loved by its second owner who is going down i scale! includes full southern fed certification, 2 x mech lub, injector, handpump and axle pump, nice access to the controls over a short tender so all in all a good model ready for the rails!
PRICE: £SOLD!
1.5 inch English Mechanical Tractor
Old and very rare model, could do with a really good clean up but mechanically very good, top notch engineering on this eye catching model
PRICE: £SOLD
1
Coal Fired, in good condition, with crankshaft pump, nice size 1 inch model, popular!
PRICE: £Reserved
South East & Chatham Railway R1
5" Gauge Factory finished model, used but in good working condition. Southern Fed certification. injector, hand pump and crosshead pump.Comes with its own carry cage!
PRICE: £RESERVED
7 1/4Inch West country Spam can.
"Spam Can" this is one of two west country we currently have for sale, t Chassis works very well on air but is two cylinder not three, it does however have the prototypical chain driven valve gear which all works very well! Robustly built but lacking in detail, We can supply a new replacement boiler from £5500.00 inc VAT, 6 month delivery. Very rare model in this size and with a bit of work will be a large impressive addition to any railway!
PRICE: £SOLD!
7 1/4 rolling stock parts
chassis parts for large wagons, ladder style 6 off in steel tube £100 each. 3. bogies pair in red, heavy duty bogies £SOLD, 4. 3 off spare or repair bogies, heavy duty, one with seized wheel sets and vacuum brake parts £95 for all three, Pair of good condition 7 1/4" Bogies, heavy duty £500 for the pair!
PRICE: £Individually
7 1/4
We still have a large selection of 7 1/4" Gauge rolling stock Ex Bolbroke castle and i though a quick break down and prices might be of interest! All the passenger carrying stock is very robust and well over engineered, shipping is available on request,all offers considered
THINKING OF LAYING A LARGE PASSENGER CARRYING LAY OUT? LOOK NO FURTHER!
3 car articulated set. Not on site. £sold
1 x 10ft open wagons, sit astride, Vacuum brake, on large chassis £sold
Cromar white guards van with brake £400
Scale box van built to a high standard of detail £450
PRICE: £individually/offers
5 Inch Loco parts
Part for 5" Locos, really nice set of sprung buffers, wheels could be from 5" Scamp? other misc parts, i'm sure you can put them to good use!
PRICE: £Sold
Dixie 5
Kit built, well used, in need of a paint restoration and mechanical overhaul, runs pretty well despite being worn! includes brake, mech lub, injector & hand pump, good winter project!
PRICE: £RESERVED
7 1/4 inch Steel Track
Large quantities of steel bar track, All 1” x ½” steer bar panel, some with and some without sleepers:
3m lengths: 124 off, £25 each
2m lengths: 62 off, £20 each
There are also some 1m lengths in various guises.
So overall there is approx 500m in panels, mixed straights and curves plus approx 40m in one meter sections.
As to points I am still waiting for a final count up but a rough estimate is around 25 + points (some in good order some will need refurbishment), mainly left handed.
points and cross overs from £150
quantity discounts available
delivery arranged if needed
Phone Me for details on 01580 893030!!
PRICE: £20 per panel £150 per point
7 1/4
(NOT ON SITE) a VERY Unique and powerful loco, There are a lot of small locos but very few that are actual models of miniature locos! This loco is based on “Norfolk Hero” at The Wells and Walsingham line, the line is run by Commander Francis and hence this loco is named “Commander” . It is around 11 ft long and about 21” wide, with 2 injectors.and copper boiler and stainless steel bodywork. The loco as present needs an improved disc braking system (using i am told Motor cycle brakes). If your looking for a huge one of a kind locomotive, look no further!
PRICE: £16995 REDUCED!
5
Twin Bogie, suitable for raised track or ground level (if you make a box). Nice robust construction, strong steel chassis, sealed bearings on the bogies. Nice quality ride on wagon. 42inches long.
PRICE: £350
3 1/2 Inch Rob Roy
Finished in Brass, mechanically very good and stored as a showroom model for some time, display case, mech lub, crosshead pump & injector. really nice example of a popular model. Unfortunatly the boiler is no good on this one so it looks like it is destined to be a show peice for a little longer unless you fancy a re-build!? new Tig welded boiler £1197.00 inc vat availble.
PRICE: £Offers
Narrow Gauge Tank 3 1/2
Large over scale 3.5 Inch Locomotive, really looks like it should be 5 Inch Gauge, well made and mechanically sound, interesting 2-4-2 chassis configuration, includes Mech Lub, Hand pump & injector. Large enough to pull some passengers but still small enough to handle by yourself!